Setup or upgrade to a BT 2700 2 wire router     (Before starting this project please ensure you have the login name this is usually your email address yournamee@btinternet.com and the password these should have been supplied by email   )
Enter 192.168.1.254  in any browser
 

SITE MAP gives an easy navigation tab

This system provides a complete set of networking and service applications for the broadband network.
The system features, services and configuration are broken down into a "basic" section for day to day
system use, and an "advanced" section for more technically apt users for system configuration and
troubleshooting.

SITE MAP
Home
Services
Status
Access Control
Summary
Time Schedule
Content Screening
BT Broadband Voice
Status
Line
Phone
Stats
BT Fusion
BT Openzone
Settings
System Info
Summary
Password
Date & Time
Event Notifications
Broadband
Status
Link Configuration
Routing
DNS Resolution
LAN
Statistics
Wireless
Wired Interfaces
Private Network
NAT & Address Allocation
Firewall
Status
Allow Applications, Pinholes and DMZ Mode
Advanced Configuration
Logs
Event Log
System Log
Upgrade Log
Firewall Log
Diagnostics
Link Test
Link Monitor
DSL
IP Utilities
NAT
Syslog
Resets
Site Map

If a Key Code is required use the default : 528Y - 27G4 - A222 - 22BJ - B22V
these should work fine. some other keys are
Manual Key Code: 5225 - 2374 - WG62 - 22AS - BJ7P
AT&T Key Code: 52AN – 2374 – WHE2 – 22AZ – B27S

System Links

BROADBAND   LINK CONFIGURATION

Username:    yourname@btinternet.com
Password      yourpassword
Atm  vpi 0  vci 38
Routed vc-mux

TICK Routing Enable (Default is enabled. Routing disabled = Bridge mode)

 

 

 

 

 

 

 

 

System Software Components

System Software Components
system:
136000
base_ui:
136001
common_en:
136002
base_voice:

136003
bt-2700hgv-pppoa_config:
136009
bt-business_providerconf:

136010
bt-business:
136011
bt-business_en:
136012
Firewall Rules
1000

Application List
1001

 

Enter access SSID name (to avoid snooping use something none descriptive not your name)
the wep key is printed on the base of your 2700 router.

 

Un tick both ssid broadcast and Enable this ssid.

 

DISABLE FUSION  VOICE OPENZONE
Check the leds on front of the router.   Once ADSL is stable wait for about 10 minutes or so
to allow BT internet connection to recognize the new mac address of the router.
after disabling openzone BT will take 24 hours to disable the settings on the router.

For user forum comments visit http://systems-edge.co.uk/smf/index.php?topic=51.0